Classic car bodywork restoration: what it involves and how to plan it
    Respray & Refurbishment

    Classic car bodywork restoration: what it involves and how to plan it

    Solution Repair Group
    9 November 2026
    7 min read

    Rust repair, panel fabrication, welding and paint. A practical guide to restoring a classic or modern classic, and how to keep the project and the budget under control.

    Winter is restoration season

    Many owners lay up their classic over the winter, which makes it the ideal time to get bodywork done ready for spring shows and summer driving.

    Start with an honest assessment

    The first job is finding out what you really have. A good restorer will inspect the car on a ramp, check the sills, floors, inner wings, jacking points, boot floor and the bottoms of doors and wings, and tell you plainly where the rust is and how far it goes.

    Bubbles in the paint usually mean there is more corrosion underneath than you can see.

    The main stages

    1. Strip and assess. Trim, glass and fittings come off, and paint is removed from the problem areas so the metal can be properly judged.
    2. Metalwork. Rotten sections are cut out. Repair panels are let in, or new sections are shaped by hand where nothing is available, and welded in.
    3. Panel alignment. Doors, bonnet and boot are fitted and gapped before any paint goes on.
    4. Preparation. Corrosion treatment, primer, filler only where it is needed, and careful blocking until the panels are straight.
    5. Paint. Colour matched to the original or your chosen shade, applied and baked in a spray booth.
    6. Reassembly and protection. Cavity wax, underseal where appropriate, and refitting of trim and seals.

    Keeping control of cost

    Restorations rarely go exactly to plan, because hidden rust turns up once panels come off. Ask for:

    • A written estimate broken down by stage
    • Photos at each stage so you can see what was found
    • A call before any extra work so nothing is added without your agreement

    Modern classics

    Restoration is not only for older cars. Hot hatches, early sports models and well loved family cars from the 1990s and 2000s are increasingly worth saving. Sills, arches and rear quarter panels are the usual trouble spots.

    Talk to us about your project

    Solution Repair Group can look over your car and give you an honest view of the work needed. Call 0800 048 8380 or visit us at Solution Repair Group, United Kingdom. You can also send photos through our online estimate form to get the conversation started.

    Related Topics
    classic car restorationcar bodywork restorationclassic car rust repaircar welding repairsmodern classic restorationcar restoration near me

    Need Expert Car Accident Repair?

    Find a trusted independent bodyshop near you through the Solution Repairs network.

    Get a Free Quote